Transformer Covers for DIY Tube Amps

We offer transformer covers for the output and mains transformers and chokes of your DIY tube amp. All covers are made in Germany and sold ex factory. For all transformer covers at a glance visit our overview page. Transformer covers are available in different sizes (base) and heights.

Which transformer cover do you need? A 80 mm transformer cover has a base that is 80 mm deep by 80 mm wide. The 100 mm transformer cover measures 100 mm by 100 mm etc. You can calculate the inside dimensions by subtracting 5 mm from each side. See the product descriptions for further information. You can quickly convert mm to inches by using our online calculator. It converts mm to inches or vice versa. Please note that you have to use a deicmal point. A decimal comma will be ignored.

mm
inches

Transformer covers 80 mm / 3.15″ for M 65/EI 66

This transformer cover is ideal for small output or mains transformers and chokes. The cover is large enough for M 65 type transformers that can be installed vertically or horizontally. This cover is suitable for transformers of low power tube amplifiers such as an EL84 single ended amp. This transformer cover is available with sharp edges or as a retro look cover with rounded edges.
Transformer Covers 80 mm/3.15 inches

Transformer covers 100 mm / 3.94″ for M 85/EI 84

This transformer cover is ideal for medium size output or mains transformers. The cover is large enough for M 85 type transformers that can be installed vertically or horizontally. This cover is suitable for transformers of low power tube amplifiers such as an EL34 single ended amp. This transformer cover is available with sharp edges or as a retro look cover with rounded edges. A low profile version is available for horizontal mounting of the transformer.
Transformer Covers 100 mm/3.94 inches

Transformer covers 120 mm / 4.72″ for M 102/EI 106

The cover is large enough for M 102 type transformers that can be installed vertically or horizontally. This cover is suitable for transformers of medium power tube amplifiers such as a 300B single ended amp. This transformer cover is available with sharp edges or as a retro look cover with rounded edges. A low profile version is available for horizontal mounting of the transformer.
Transformer Covers 120 mm/4.72 inches

Transformer covers 150 mm / 5.91″ for EI 130

This is a pretty big one! This transformer cover is ideal for very large output or mains transformers that can be installed vertically or horizontally. This cover is suitable for transformers of both medium power tube amplifiers such as a 300B single ended amp and high power PP amps. This transformer cover is available with sharp edges or as a retro look cover with rounded edges. A low profile version is available for horizontal mounting of the transformer.
Transformer Covers 150 mm/5.91 inches

Some additional information

When we were looking for transformer covers for our own projects, we couldn’t find any suppliers in Europe. Covers are available from Hongkong, but we didn’t like them very much. Additionally shipping cost can be ruinous. Traditionally, covers like these are deep-drawn or made by aluminum die casting. Die casting is not ideal for these covers, since they must have an angle of 2-3 degrees for easy removing the unfinished part off the form. That simply doesn’t look very good. We don’t want our covers to look like the Leaning Tower of Pisa. Deep-drawing would be the appropriate process for manufacturing transformer covers. Unfortunately, a tool is 10.000 EUR or more for one type of cover. This is simply not an option.

So we thought about optimized manufacturing for producing relatively small quantities at acceptable costs. Whenever possible, CNC controlled machines are used. However, the transformer covers have to be sanded and primed manually. All products are made in-house and offered ex factory.

The images show different stages of the process. The first picture shows the transformer cover after mechanical processing and sanding. Then a first layer of primer is applied. If neccessary filler is applied. On the last picture you can see the fnished product. Click the images to enlarge. To close click on the image again.

To keep production cost low we don’t offer customization on a regular basis. If you need a special size or type for your project, feel free to contact us for further information. We will expand our production range step-by-step.

For some interesing 3D renderings visit our site 3D renderings. If you want to see tube amplifiers built by customers, visit our customer tube amp gallery. This might give you some interesting ideas for your own projects.

Hopefully you will enjoy our products and use them for your next project. If you need further information send us a note to or go to the contact page. We will reply as soon as possible. The FAQs (frequently asked questions) give you a quick overview. We provide more detailed information in the support section, where we discuss ideas, comments or requests from customers in detail.